PAPER FEED
SM 6-119 B234/B235/B236/D101/D102/D103
Detailed
Descriptions
6.14.6 PAPER SIZE DETECTION
Tandem Tray (Tray 1)
The tandem tray does not have paper size switches. Every time the paper size is
changed by moving the front and back fences, you must enter the selected paper
size with SP5019-002.
If you set SP 5019 002 to ‘custom size’, then you can input a custom size for the
tandem tray with SP 5040 and 5041.
Universal Cassettes (Tray 2, 3)
The output from the switch depends on the position of the dial (see the table on the
following page)
The paper size switch [A] detects the paper size with 5 microswitches. The actuator
plate [B], attached to the rear of the paper tray, actuates the paper size switch, and
the side fence [C] changes position.
B234D961.WMF
[A]
[B]
[C]
To Next Page
Loading...
