Ricoh B234 - Dip Switches

Boards
B234/B235/B236/D101/D102/D103 6-180 SM
6.18.2 DIP SWITCHES
MCU
SW1
NO. COMMENTS
1 OFF
2 OFF
3 OFF
4 OFF
Do not change these settings.
IOB
SW101
NO. NA EUR/ASIA COMMENTS
1 ON OFF
2 OFF ON
3 OFF OFF
NA: Only SW1 set to ON, Others OFF.
EUR/ASIA: Only SW2 set to ON, Others OFF
4
OFF
5
OFF
6
OFF
7
ON
8
OFF
Do not change these settings.
ADF Main Board
DPS100
4 3 2 1
Description
0 0 0 0 Normal operating mode
0 0 0 1 Motor Test: Transport motor – Forward
0 0 1 0 Motor Test: Transport motor – Reverse
0 0 1 1 Motor Speed Adjustment (Automatic)
0 1 0 0
Original stop position adjustment – Single-sided original mode
(No original skew correction)
0 1 0 1 Original stop position adjustment – Double sided original mode
1 0 0 0 Free Run: Single-sided original mode with skew correction
1 0 1 0 Free Run: Single-sided original mode without skew correction
0 1 1 0 Free Run: Double-sided original mode
Others Do not select
“SADF” LED turns on when one of DIP switch turns on.