Ricoh BE-C1 D046 - Page 115

5. Fasten the damper unit to the paper entrance unit: ( x6 M3x6).
[A] Left ( x2 M3x6)
[B] Right ( x2 M3x6)
[C] Center front ( x1 M3x6)
[D] Center rear ( x1 M3x6)
Bridge Unit
1. Lift the bridge unit and place its holes over the two shoulder screws that were previously installed on
the paper entrance unit.
Bridge Unit BU6500 (D407) Folder FD6500A (B889)
113
2