Ricoh BE-C1 D046 - Page 404

No. Application Default Comments
1 Selects boot device OFF
Boot SW1 SW2 SW3
USB OFF OFF OFF
SD Card ON OFF OFF
2 Selects boot device OFF
3 Selects boot device OFF
4 Selects "Quick Boot" OFF
OFF: Quick Boot
ON: Normal Boot
5 Selects Boot Prompt OFF
OFF: Disable
ON: Enable
6 - OFF Do Not Use
7 - OFF Do Not Use
8 - OFF Do Not Use
SW 3
No. Application Default Comments
1 - OFF Do Not Use
2 - OFF Do Not Use
3
Initializes CMOS RAM in
ICH6-M
OFF
OFF: Normal
ON: Clear
4 - OFF Do Not Use
5 Selects boot device 2 ON:
Selects sub system software boot device.
Boot SW5 SW6
Flash ROM ON ON
SD Card OFF OFF
6 Selects boot device 2 ON:
4. Replacement and Adjustment
402
4