1 Change On/Off
This SP switches fine line processing by the LPH off and on.
[0 to 1/1/1]
0: Disabled
1: Enabled
10 Level Select: > 2 dots
This SP selects the level for fine line processing of vertical lines thicker than two dots.
[0 to 3/1/1]
0: Strongest processing (thinnest)
1: Normal processing
2: Weaker processing
3: Weakest processing (thickest)
The illustration above shows how two elements comprise each dot. This example shows vertical and
horizontal 1-dot lines.
8. Appendix: SP Mode Tables
132
To Next Page
Loading...
