4710 BS: Gray Balance Adjustment Value
This SP displays the adjusted gray balance value of ASIC_1 (the value set for "R" digital gain)
for the CIS monochrome scan mode.
4711 BC: Gray Balance Adjustment Value
This SP displays the adjusted gray balance value of ASIC_1 (the value set for "R" digital gain)
for the CIS monochrome copy mode.
4718 CS: Gray Balance Reading Value (Present)
This SP displays the current value of the gray balance adjustment for ASIC_1:R (Marble_1:
R).
[0 to 4095/0/1]
4719 CS: Gray Balance: Reading Value (Factory)
This SP displays the gray balance adjust setting for CS: ASIC_1:R (CS: Marble_1:R) that was
done at the factory.
4720 BS: Gray Balance: Reading Value (Factory)
This SP displays the gray balance adjust setting for BS: ASIC_1:R (BS: Marble_1:R) that was
done at the factory.
4721 BC: Gray Balance: Reading Value (Factory)
This SP displays the gray balance adjust setting for BC: ASIC_1:R (BC: Marble_1:R) that was
done at the factory.
4744
Gray Balance Error Flag
This SP displays errors that occur during gray balance adjustment.
Note: In the bit display "0" indicates "normal", "1" indicates an "error".
0 : GB_ERR_R_CS
1 : GB_ERR_G_CS
2 : GB_ERR_B_CS
3 : GB_ERR_R_BC
4 : GB_ERR_G_BC
5 : GB_ERR_B_BC
8. Appendix: SP Mode Tables
144
To Next Page
Loading...
