Sets the wait time to slow down the speed of certification when an excessive number of
access attempts have been detected.
[0 to 9/b/1 sec.]
4
Attack Max Number
Sets a limit on the number of requests received for certification in order to slow down the
certification speed when an excessive number of access attempts have been detected.
[50 to 200/200/1 attempt]
5420 User Authentication GW
These settings should be done with the System Administrator.
Note: These functions are enabled only after the user access feature has been enabled.
1 Copy
Determines whether certification is required before a user can use the copy applications.
[0 to 1/0/1]
0: On
1: Off
2: Color Security Setting
11
Document Server
Determines whether certification is required before a user can use the document server.
[0 to 1/0/1]
0: On
1: Off
31
Scanner
Determines whether certification is required before a user can use the scan applications.
[0 to 1/0/1]
0: On
1: Off
41
Printer
Determines whether certification is required before a user can use the printer applications.
[0 to 1/0/1]
0: On
System Service Mode
159
To Next Page
Loading...
