1: Off
51 SDK1
[0 or 1/ 0 / 1] 0: ON. 1: OFF
Determines whether certification is required before a user can use the
SDK application.
61 SDK2
71 SDK3
5481
Authentication Error Code GW
These SP codes determine how the authentication failures are displayed.
1
System Log Disp
Determines whether an error code appears in the system log after a user authentication
failure occurs.
[0 to 1/0/1]
0: Off
1: On
2
Panel Disp
Determines whether an error code appears on the operation panel after a user
authentication failure occurs.
[0 to 1/1/1]
1: On
0: Off
5490
MF Keycard Japan Only
Sets up operation of the machine with a keycard.
[0 to 1/0/1]
0: Disabled. Cancels operation if no code is input.
1: Enabled. Allows operation if another code is input and decrements the counter once for
use of the entered code.
5501 PM Alarm
1
PM Alarm Level
Sets the count level for the PM alarm.
[0 to 9999/1]
0: Alarm disabled
8. Appendix: SP Mode Tables
160
To Next Page
Loading...
