Note: The PM alarm goes off when the print count reaches this value (multiplied by 1,000).
2 Original Count DFU
5504 Jam Alarm
Japan Only5505 Error Alarm
5507 Supply Alarm
5508 CC Call Japan Only
1 Jam Remains
2 Continuous Jams
3
Continuous Door Open
Enables/disables initiating a call.
[0 to 1/1]
0: Disable
1: Enable
11
Jam Detection: Time Length
Sets the length of time to determine the length of an unattended paper jam.
[03 to 30/1]
This setting is enabled only when SP5508-004 is enabled (set to 1).
5515
SC/Alarm Setting
With @Remote in use, these SP codes can be set to issue an SC call when an SC error
occurs. If this SP is switched off, the SC call is not issued when an SC error occurs.
001 SC Call
[0 or 1 / 1 / 1]
0: OFF
1: ON
002 Service Parts Near End Call
003 Service Parts End Call
004 User Call
005 Communication Information Test Call
[0 or 1 / 1 / 1]
0: OFF
006 Machine Information Notice
System Service Mode
161
To Next Page
Loading...
