0: Not allowed
1: Allowed
5857 Save Debug Log GW
1
On/Off (1:ON 0:OFF)
Switches on the debug log feature. The debug log cannot be captured until this feature is
switched on.
0: OFF 1: ON
2
Target (2: HDD 3: SD Card)
Selects the destination where the debugging information generated by the event selected
by SP5858 will be stored if an error is generated
2: HDD 3: SD Card
5
Save to HDD
Specifies the decimal key number of the log to be written to the hard disk.
6
Save to SD Card
Specifies the decimal key number of the log to be written to the SD Card.
9
Copy HDD to SD Card (Latest 4 MB)
Takes the most recent 4 MB of the log written to the hard disk and copies them to the SD
Card.
A unique file name is generated to avoid overwriting existing file names on the SD Card. Up
to 4MB can be copied to an SD Card. 4 MB segments can be copied one by one to each
SD Card.
10
Copy HDD to SD Card Latest 4 MB Any Key)
Takes the log of the specified key from the log on the hard disk and copies it to the SD Card.
A unique file name is generated to avoid overwriting existing file names on the SD Card. Up
to 4 MB can be copied to an SD Card. 4 MB segments can be copied one by one to each
SD Card. This SP does not execute if there is no log on the HDD with no key specified.
11
Erase HDD Debug Data
Erases all debug logs on the HDD
12
Erase SD Card Debug Data
8. Appendix: SP Mode Tables
194
To Next Page
Loading...
