These SPs total finishing methods for jobs output from within the document server mode screen
at the operation panel. The finishing method is specified from the print window within
document server mode.
8067
O:FIN Jobs [0 to 9999999/1]
These SPs total finishing methods for jobs executed by an external application, over the
network. The finishing method is specified by the application.
001 Sort
Number of jobs started in Sort mode. When a stored copy job
is set for Sort and then stored on the document server, the L:
counter increments. (See SP8066)
002 Stack Number of jobs started out of Sort mode.
003 Staple Number of jobs started in Staple mode.
004 Booklet
Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
005 Z-Fold
Number of jobs started In any mode other than the Booklet
mode and set for folding (Z-fold).
006 Punch
Number of jobs started in Punch mode. When Punch is set for
a print job, the P: counter increments. (See SP8064)
007 Other Reserved. Not used.
8071
T:Jobs/PGS [0 to 9999999/1]
These SPs count the number of jobs broken down by the number of pages in the job,
regardless of which application was used.
8072
C:Jobs/PGS [0 to 9999999/1]
These SPs count and calculate the number of copy jobs by size based on the number of
pages in the job.
8074
P:Jobs/PGS [0 to 9999999/1]
These SPs count and calculate the number of print jobs by size based on the number of pages
in the job.
8075
S:Jobs/PGS [0 to 9999999/1]
These SPs count and calculate the number of scan jobs by size based on the number of pages
in the job.
System Service Mode
245
To Next Page
Loading...
