8382 C:Total PrtPGS
8384 P:Total PrtPGS
8385 S:Total PrtPGS
8386 L:Total PrtPGS
8387 O:Total PrtPGS
These SPs count the number of pages printed by the customer. The counter for the
application used for storing the pages increments.
[0 to 9999999/1]
The L: counter counts the number of pages stored from within the document server
mode screen at the operation panel. Pages stored with the Store File button from
within the Copy mode screen go to the C: counter.
838x 1 Field Number Total number of copies (regardless of size)
838x 2 Length (High) Total length
838x 3 Length (Low) Total length
838x 4 Area (High) Total area coverage
838x 5 Area (Low) Total area coverage
Note:
• The values for "Length" are displayed in mm. If a "Length" reading is "42126"
this is 42,126 mm (42.126 m).
• The values for "Area" are displayed as mm
2
. If an "Area" reading is
"33213257" this is 33,213,257 mm
2
(33,213.257 m
2
).
• The counts for the "Length" and "Area" start with "Low". Once the count exceeds
the width of the field on the display the "Low" field will reset to "0" and the count
overflows to the "High" SP codes. (This is necessary because the fields of the
"Low" SP codes are limited to 8 digits and not wide enough to display the full
reading for a reading larger than 8 digits.)
• Always check the "Low" SP first. If the "Low" display is zero, check the "High"
field.
• When the length count reaches "99,999,999" in the "Low" field (8 digits), for
example, after the next copy the count will show "1" in the "High" field and "00
000 000" in the "Low". Multiply the "1" in the "High" field by: 1)
10
8
" (100,000,000 mm), 2) 10
5
(100, 000 m) or 3) 10
2
(100 kilometers) to
determine the accurate count.
8. Appendix: SP Mode Tables
254
To Next Page
Loading...
