No. Component
14 Roll 2 Pre-Feed Switch
15 Roll 2 Width Sensor Not Used
20 Lower Roll Tray Safety Switch Bit7 to 1 Not Used
21 Lower Roll Tray Open Bit0 1 ON
22 Lower Cutter Cover Open
23 Lower Cutter Switch: Right
24 Lower Cutter Switch: Left
25 Lower Roll Tray Exit Sensor
26 Roll 3 Leading Edge Sensor
27 Roll 3 Roll End Sensor
28 Roll 3 Paper End Sensor
29 Roll 3 pre-Feed Switch
30 Roll 3 Width Sensor Not Used
31 Roll 4 Leading Edge Sensor Bit7 to 1 Not Used
32 Roll 4 Roll End Sensor Bit0 1 ON
33 Roll 4 Paper End Sensor
34 Roll 4 Pre-Feed Switch
35 Roll 4 Width Sensor Not Used
50 Cassette Unit Sensor Bit7 to 1 Not Used
51 Cassette Open Sensor 1 Bit0 1 ON
52 Paper Feed Sensor 1
53 Paper End sensor 1
54 Paper Near End Sensor 1
55 Tray Lift Sensor 1
56 Paper Width Switch 1
Bit7 to 3: Not Used
Input Check
277
To Next Page
Loading...
