1. Move the assembled multi-stacker to the rear of the machine.
2. Loosen the height adjustment knobs [1] on the left and right side of the multi-stacker.
3. Swing the edge of the stacker to the edge of the rear copy exit.
4. Tighten the height adjustment knobs on the left and right side of the stacker.
5. Loosen the tray extension knobs [1] and [2].
6. Extend the tray [3] to the edge of the rear copy exit .
7. Tighten the extension knobs.
2. Installation
92
To Next Page
Loading...
