1. IEEE 1284 port (optional)
Port for connecting an IEEE 1284 interface cable
2. Gigabit Ethernet port
Port for using a 1000BASE-T, 100BASE-TX, or 10BASE-T cable
Use this interface to connect the machine to a network.
If you use an Ethernet interface cable that supports 1000BASE-T, set
[Ethernet Speed] to [Auto Select: Enable
1Gbps] in [Interface Settings] in [System Settings].
3. USB 2.0 [Type B] port
Port for connecting a USB2.0 [Type B] interface cable
This interface allows the machine to print over USB connection.
The other end of the USB cable must be connected to the Extended USB
Port (optional).
Do not connect to devices other than the machine.
4. USB Host Interface
Port for connecting a USB interface cable or USB interface device
Use this interface to connect the machine to a card authentication device,
external keyboard, or Bluetooth.
14
To Next Page
Loading...
