1. Top cover
Open to access the inside of the printer and remove jammed paper.
Open here to replace the print cartridge.
2. Standard tray
Output is stacked here with the print side down.
3. Control panel
4. Vents5. Paper size dial
Use this dial to specify the paper size. To use a paper size that is not
indicated on the paper size dial, set the dial to “*". If this is the case, set the
paper size using the control panel.
6. Main power switch
Use this switch to turn the power on and off.
7. Front cover
Open to access the inside of the printer and remove jammed paper.
Open here to replace the print cartridge.
8. Tray 1
Up to 500 sheets of plain paper can be loaded.
9. Extender for the bypass tray
Pull this extender out when loading A4 , 81/2 x 11 or larger size paper in the
bypass tray.
10. Bypass tray
Up to 100 sheets of plain paper can be loaded.
11. Paper guides
When loading paper in the bypass tray, align the paper guides flush against
15
To Next Page
Loading...
