1. Copy Tray
2. Finisher Upper Tray
3. Finisher Shift Tray
The default setting is Copy Tray.
Output: Document Server (Document Server)
Specify a tray to which documents are delivered.
The default setting is Copy Tray.
Output: Facsimile (facsimile)
Specify a tray to which documents are delivered.
The default setting is Copy Tray.
"Finisher Shift Tray" is displayed when the optional finisher SR4010 (50-sheet-staples) or finisher
SR4020 (saddle stitch) is installed.
Output: Printer (printer)
Specify a tray to which documents are delivered.
The default setting is Copy Tray.
ADF Original Table Elevation
Set when to raise the ADF plate after placing originals on the Auto Document Feeder (ADF).
The default setting is When Original is Set.
General Features
59
To Next Page
Loading...
