28
5. Gently press the shutter button all
the way.
The still image you have taken freezes
for a moment on the LCD Monitor and is
recorded.
Note
• Press gently to prevent camera shake when you press the shutter release button.
• The mark indicates that blurring may occur. Hold the camera still and focus the
camera again.
• When shooting in a dark place, the camera raises the focusing performance (auto focus
precision) by preliminary flashing immediately before shooting. This preliminary flashing is
skipped for shooting in no-flash mode.
• When the [LCD CONFIRM] is set to OFF in the setup screen, the still image shot will not be
displayed on the LCD monitor.
Reference
For how to change the image confirmation time, see P.101.
Color of
crosshairs
Auto Focus/Flash Lamp
Before focusing White Off
Focused Green On (green)
Focusing failure Blink (red) Blink (green)
Auto Focus/Flash Lamp
Crosshair
To Next Page
Loading...
