11
Chapter 1 / Section 1 Getting Started
To turn the camera On
Press the power button.
The flash lamp and auto-focus lamp will flash
alternately for several seconds.
To turn the camera Off
Press the power button.
Turning the Power On/Off
The camera is switched between On and Off as follows.
Auto Power-off
• If the camera goes unused for a set period of time, it will automatically turn itself off to save power. To use
the camera again, simply press the power switch.
• At time of purchase, the Auto Power-off time is set to one minute.
• The Auto Power-off function does not work when connected to your computer.
For how to change the Auto Power-off time, see p.97.
To Next Page
Loading...
