25
Chapter 1 / Section 1 Getting Started
The Basics of the Setup Screen
To display the Setup Screen:
Turn the Mode Dial to (Setup Mode).
The Setup Screen is displayed.
To select an item:
Press the buttons to select the desired
item.
To select a setting value:
Press the buttons to select the desired
item.
When you have selected [EXECUTE]:
Press the button.
The following screen is displayed, so make
the necessary settings.
To close the Setup Screen:
Switch the Mode Dial to another mode.
The sequence of operations is slightly different depending on the item for which the setting change is being
made. For a detailed explanation of each of the items, see Section 6 (p.93-103).
To Next Page
Loading...
