71
Chapter 1 / Section 4 Viewing Still Images and Movies
To display the still image you just took, follow the
steps below.
While still in the Shooting Mode, press the
(Quick Review) button.
The still image you just took is displayed on the LCD
Monitor.
Buttons used here
Viewing the Photo You Just Took
Right after shooting a still image, if you want to see it immediately, you can display the shot in
Shooting Mode. This function is called Quick Review.
For movies, the first frame appears as a still image.
Once the power is turned off, Quick Review cannot be displayed again in Shooting Mode.
To Next Page
Loading...
