Ricoh Caplio RR30 - Buzz at Recording (BEEP SOUND)

98
Chapter 1 / Section 6 Changing Camera Settings
To make changes to the beep sound, follow the
steps below.
Turn the Mode Dial to (Setup Mode).
The Setup Screen appears.
Press the button to select [BEEP
SOUND].
Press the buttons to select the desired
setting.
This setting will be used until you change it.
O
N (Make sound)⁄ Set at purchase
O
FF (Silent)
Possible Settings
Buzz at Recording (BEEP SOUND)
When you shoot an image, it is immediately recorded to internal memory or SD Memory Card. When
recording, your camera makes a beep sound to let you know it is recording.
You can set the camera so it does not make this sound.