• For information about the "spoolsw clear job" command on the telnet, see "Remote Maintenance by
telnet".
• p.218 "Remote Maintenance by telnet"
Setting Spool Printing
Spool printing settings can be made using telnet or Web Image Monitor.
• Using Web Image Monitor
In [System] on the [Configuration] menu, click [Active] in [Spool Printing].
• Using telnet
Enter "spoolsw spool on".
• For details about Web Image Monitor, see Web Image Monitor Help.
• For details about "spoolsw spool on", see "Remote Maintenance by telnet".
• p.218 "Remote Maintenance by telnet"
Viewing or Deleting spooled jobs using Web Image Monitor
Follow the procedure below to check or delete spooled jobs using Web Image Monitor.
1. Open a Web browser.
2. Enter "http://(printer's address)/" in the address bar to access the printer whose settings
you want to change.
Top Page of Web Image Monitor appears.
3. Click [Login].
The window for entering the login user name and password appears.
4. Enter the login user name and password, and then click [Login].
Contact your administrator for information about the settings.
5. In the menu area, click [Job].
A submenu will appear.
6. On the [Printer] menu, click [Spool Printing].
A list of spooled jobs appears.
2. Printing Documents
76
To Next Page
Loading...
Need help?
General
