Message Problem and solutions
specified SMTP password is incorrect. Check the
SMTP user name and password.
Snmp over IPv4 is ready. Communication over IPv4 with snmp is available.
Snmp over IPv6 is ready. Communication over IPv6 with snmp is available.
Snmp over IPX is ready. Communication over IPX with snmp is available.
trap account is unavailable. v3Trap cannot be sent. This could be because the
Trap destination account is different from the
account specified by the printer.
Updated (option name) (value) via DHCPv6 Server The parameter obtained from the DHCP server has
been updated.
WSD (Device) started. WSD (Device) has started.
WSD (Printer) started. WSD (Printer) has started.
• For details about UNIX commands and parameters, see UNIX Supplement.
• For details about "syslog" command, see "Remote Maintenance by telnet".
• p.218 "Remote Maintenance by telnet"
Message List
281
To Next Page
Loading...
Need help?
General
