Ricoh D117 - Page 954

Main SP Tables-8
D117/D118 3-452 SM Appendix
8 221
ADF Org Feeds *CTL
[0 to 9999999/ - / 1]
These SPs count the number of pages fed through the ADF for front and back
side scanning.
8 221
-001
Front
Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Front side count is
the same as the number of pages fed for either simplex or duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Front side count
is the same as the number of pages fed for duplex front side scanning. (The
front side is determined by which side the user loads face up.)
8 221
-002
Back
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back count is the
same as the number of pages fed for duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Back count is the
same as the number of pages fed for duplex rear-side scanning.
 When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
 If a jam occurs during the job, recovery processing is not counted to avoid double counting.
Also, the pages are not counted if the jam occurs before the first sheet is output.
8 231
Scan PGS/Mode *CTL
[0 to 9999999/ - / 1]
These SPs count the number of pages scanned by each ADF mode to
determine the work load on the ADF.
8 231
-001
Large Volume
Selectable. Large copy jobs that cannot be
loaded in the ADF at one time.
8 231
-002
SADF
Selectable. Feeding pages one by one through
the ADF.
8 231
-003
Mixed Size
Selectable. Select "Mixed Sizes" on the operation
panel.
8 231
-004
Custom Size Selectable. Originals of non-standard size.