Ricoh D127 - Page 177

B
[0702]: Detailed error code
The result when the program is
executed in the command cache is
different from desirable value.
• Insufficient CPU cache
•
Insufficient memory process speed
1. Replace the controller board.
2. Replace the RAM DIMM.
B
[0709, 070A]: Detailed error code
Even you write the data in the only
cache of memory, the data is
actually written in another area (not
cache) of memory.
• Defective CPU devices
•
Incorrect SPD
• Boot mode setting error
1. Replace the controller board.
2. Replace the RAM DIMM.
B
[0801, 0804, 0807, 0808, 0809, 80A]: Detailed error code
An error occurs when checking the
TLB.
• Defective CPU devices
1.
Replace the controller board.
B
[4002-4005]: Detailed error code
The calculation error in the CPU
occurs.
• Defective CPU
1.
Replace the CPU.
821 Self-Diagnostic Error: ASIC
[0B00] B
ASIC error
The write-&-verify check error has
occurred in the ASIC.
• Defective controller board
1.
Replace the controller.
[0B06] B
ASIC not detected
The ASIC of the I/O is not detected.
• ASIC (controller board defective)
•
Poor connection between North
Bridge and PCI I/F.
1. Replace controller board.
SC Tables
175