Ricoh D127 - Page 264

5066 PM Parts Display
001 PM Parts Display CTL
Displays or does not display the PM part button on
the LCD.
[0 or 1 / 0 / -]
0: Not display, 1: Display
5112* Non-Std. Paper Sel. [0:OFF 1:ON]
5112 1 Sets “Non-standard size setting” in usual panel operations, available or not.
5113 Optional Counter Type
001
Default Optional
Counter Type
CTL
This program specifies the counter type.
0: None
1: Key card (RK 3, 4)
2: Key card (down)
3 to 10: (Japan only)
11: Exp. Key card (Add)
12: Exp. Key card (Deduct)
002
External Optional
Counter Type
CTL
This program specifies the external counter type.
0: None
1: Expansion Device type 1
2: Expansion Device type 2
3: Expansion Device type 3
5114 Optional Counter I/F CTL
[0: Not installed/ 1: Installed (scanning
accounting)]
001 MF Key Card Ext. Japan use
5118 Disable Copying
001
[0: Not disable / 1: Disable]
Sets copy disabled or enabled.
3. Appendix: SP Mode Tables
56
RTB 11 (f/w ver 3.12)
SP5-083-001 was newly added.