Ricoh D127 - Page 289

127
Reso: Scanner (Color) [0 to 255 / 4 / 1 /step]
The value affects the resolution applying to capturing a colored original read by Scanner
application. See the list below.
Normally, the value is determined automatically on CS I/O device registration.
*When the resolution cannot be output for the machine specification limit, output is done
by the nearest rate within the limitation.
Value Resolution
0 600dpi
1 400dpi
2 300dpi
3 200dpi
4 150dpi
5 100dpi
6 75dpi
128
Reso: Scanner (Mono) [0 to 255 / 3 / 1 /step]
The value affects the resolution applying to capturing a monochrome original read by
Scanner application. See the list below.
Normally, the value is determined automatically on CS I/O device registration.
*When the resolution cannot be output for the machine specification limit, output is done
by the nearest rate within the limitation.
Value Resolution
0 600dpi
1 400dpi
2 300dpi
3 200dpi
4 150dpi
5 100dpi
6 75dpi
System Service Mode
81