Ricoh D127 - Page 290

141 All Addr Info Switch [0 or 1 / 0 / 1 /step]
142
Stand-by Doc Max Number [10 to 10000 / 2000 / 1 /step]
Sets how many stand-by documents sent to CS the device can hold.
5840 IEEE 802.11
006
Channel MAX CTL
[1 to 11 or 13 / 11 or 13 / 1 /step]
Europe: 1 to 13, default: 13
NA/ Asia: 1 to 11, default: 11
Sets the maximum number of channels available for data transmission via Wireless LAN.
The number of channels available varies according to location. The default settings are
set for the maximum end of the range for each area. Adjust the upper 4 bits to set the
maximum number of channels. DFU
• Do not change the setting.
007
Channel MIN CTL
[ 1 to 11 or 13 / 1 / 1 /step]
Europe: 1 to 13
NA/ Asia: 1 to 11
Sets the minimum number of channels available for data transmission via the wireless
LAN. The number of channels available varies according to location. The default settings
are set for the minimum end of the range for each area. Adjust the lower 4 bits to set the
minimum number of channels. DFU
• Do not change the setting.
008
Transmission Speed [00 to FF h / FF (Auto)]
Each value suggests as follows:
FF= Auto / 11= 54M Fix / 10= 48M Fix / 0F= 36M Fix / 0E= 24M Fix
0D= 18M Fix / 0C= 12M Fix / 0B= 9M Fix / 0A= 6M Fix / 07= 11M Fix
06= 5.5M Fix / 05= 2M Fix / 08= 1M Fix /
13 to FE= Reserved / 12= 72M Fix / 09= 22M Fix / 01 to 04= Not used
3. Appendix: SP Mode Tables
82