216 Interval Time
Specifies the transmit interval.
[1 to 1000 / 1 / 1 hour/step]
This SP is activated only when SP5848-217 is set to
"2 (Transmit periodically)".
217 Timing
Selects the transmit timing.
[0 to 2 / 0 / 1/step]
0: No Transmit, 1: Transmit one by one
2: Transmit periodically
5849
Installation Date CTL
Displays or prints the installation date of the machine.
001 Display
The "Counter Clear Day" has been changed to "Installation Date"
or "Inst. Date".
002 Switch to Print
Determines whether the installation date is printed on the printout
for the total counter.
[0 or 1/ 1 / 1/step]
0: Off (No Print), 1: On (Print)
003 Total Counter
Displays the total counter when the installation date is registered
to the machine.
5853
Stamp Data Download
Push [Execute] to download the fixed stamp data from the machine ROM onto the hard
disk. Then these stamps can be used by the system. If this is not done, the user will not
have access to the fixed stamps ("Confidential", "Secret", etc.).
You must always execute this SP after replacing the HDD or after formatting the HDD.
Always switch the machine off and on after executing this SP.
5856
Remote ROM Update
Allows the technician to upgrade the firmware using a parallel cable when updating the
remote ROM.
System Service Mode
93
To Next Page
Loading...
