Ricoh D127 - Page 328

All reports done in the service mode (service summaries, engine maintenance reports, etc.)
Test prints for machine image adjustment.
Error notification reports.
Partially printed pages as the result of a copier jam.
8 391
LSize PrtPGS CTL [0 to 99999999 / 0 / 1]
These SPs count pages printed on paper sizes A3/DLT and larger.
• In addition to being displayed in the SMC Report, these counters are also
displayed in the User Tools display on the copy machine.
8 411 Prints/Duplex CTL
This SP counts the amount of paper (front/
back counted as 1 page) used for duplex
printing. Last pages printed only on one side
are not counted.
[0 to 99999999 / 0 / 1]
8 421
T:PrtPGS/Dup Comb CTL [0 to 99999999 / 0 / 1]
These SPs count by binding and combine, and n-Up settings the number of pages
processed for printing. This is the total for all applications.
8 422
C:PrtPGS/Dup Comb CTL [0 to 99999999 / 0 / 1]
These SPs count by binding and combining, and n-Up settings the number of pages
processed for printing by the copier application.
8 423
F:PrtPGS/Dup Comb CTL [0 to 99999999 / 0 / 1]
These SPs count by binding and combining, and n-Up settings the number of pages
processed for printing by the fax application.
8 424
P:PrtPGS/Dup Comb CTL [0 to 99999999 / 0 / 1]
These SPs count by binding and combining, and n-Up settings the number of pages
processed for printing by the printer application.
8 425
S:PrtPGS/Dup Comb CTL [0 to 99999999 / 0 / 1]
These SPs count by binding and combining, and n-Up settings the number of pages
processed for printing by the scanner application.
3. Appendix: SP Mode Tables
120