Code Meaning Suggested Cause/Action
0-08
The other end sent RTN or PIN
after receiving a page,
because there were too many
errors
• Check the line connection.
•
Replace the NCU or FCU.
• The other end may have jammed, or run out of
paper or memory space.
• Try adjusting the tx level and/or cable equalizer
settings.
• The other end may have a defective modem/NCU/
FCU; try sending to another machine.
• Check for line problems and noise.
Cross reference
• Tx level - NCU Parameter 01 (PSTN)
• Cable equalizer - G3 Switch 07 (PSTN)
• Dedicated Tx parameters in Service Program Mode
0-14
Non-standard post message
response code received
• Incompatible or defective remote terminal; try
sending to another machine.
•
Noisy line: resend.
• Try adjusting the tx level and/or cable equalizer
settings.
• Replace the NCU or FCU.
Cross reference
See error code 0-08.
0-15
The other terminal is not
capable of specific functions.
The other terminal is not capable of accepting the
following functions, or the other terminal’s memory is full.
• Confidential rx
• Transfer function
• SEP/SUB/PWD/SID
Fax Error Codes
161
To Next Page
Loading...
