Ricoh D127 - SP6-XXX (Report)

103
Reset Bit SW (Except secure)
001 Resets the bit switches and user parameters.
104
Factory Setting
001
Resets the bit switches and user parameters, user data in the SRAM
and files in the SAF memory.
105
Reset All Bit Switches
001 Initializes all the current bit switch settings.
106
Reset Secure Bit Switches
001
Initializes only the security bit switches. If you select automatic output/
display for the user parameter switches, the security settings are
initialized.
SP6-XXX (Report)
6 Mode No. Function
101
System Parameter List
001 -
Touch the “ON” button to print the system
parameter list.
102
Service Monitor Report
001 -
Touch the “ON” button to print the service monitor
report.
103
G3 Protocol Dump List
002
G3-1 (All
Communications)
Prints the protocol dump list of all communications
for the G3-1 line.
003
G3-1
(1 Communication)
Prints the protocol dump list of the last
communication for the G3-1 line.
5. Appendix: Fax Service Program
190