1
Going into the Energy Saver mode
automatically
0: Enabled
1: Disabled
1: The machine will restart from the Energy Saver mode
quickly, because the +5V power supply is active even in
the Energy Saver mode.
2-3 Not used Do not change these settings.
4-5
Interval for preventing the machine
from entering Energy Saver mode
if there is a pending transmission
file.
Bit 5: 0, Bit 4: 0
1 min
Bit 5: 0, Bit 4: 1
30 min1
Bit 5: 1, Bit 4: 0
1 hour
Bit 5: 1, Bit 4: 1
24 hours
If there is a file waiting for transmission, the machine does
not go to Energy Saver mode during the selected period.
After transmitting the file, if there is no file waiting for
transmission, the machine goes to the Energy Saver
mode.
6-7 Not used Do not change
System Switch 16 [SP No. 1-101-023]
No FUNCTION COMMENTS
0 Parallel Broadcasting
0: OFF
1: ON
1: The machine sends messages simultaneously using all
available ports during broadcasting.
1-7 Not used Do not change these settings.
System Switch 17 - Not used (do not change these settings)
System Switch 18 - Not used (do not change these settings)
System Switch 19 [SP No. 1-101-026]
No FUNCTION COMMENTS
Bit Switches
201
To Next Page
Loading...
