Ricoh D127 - Page 312

System Service Mode
D127/D128 3-56 SM Appendix
185 User Permit: Screen Settings
201 JPEG Quality
202 Number of Common Bookmark
204 Vertical Scroll Bar display mode
0:
A
lways display (Default)
1: Displa
y
when pressin
g
“Pro
g
ram Ke
y
205
Confirmation dialog display
setting
NOTE:
- If enabled, the “Page change
confirmation dialog” is displayed when
the user moves from the current page
to a different one.
- The “SSL certificate confirmation
dialog” is displayed when an
SSL-related problem occurs.
- If the customer is using an internal
(original) Web application, i.e. a fully
trusted application, this SP can be set
to “2” (do not display either dialog).
Value Page change
confirmation
dialo
g
SSL certificate
confirmation
dialo
g
0
(
Default
)
Dis
p
la
y
Dis
p
la
y
1 Not dis
p
la
y
Dis
p
la
y
2Not Dis
p
la
y
Not dis
p
la
y
3Displa
y
Not displa
y
206
Displayed but it should not be used (Not for field use).
5793
ECS Debug SW
DFU
5794
Browser Debug
DFU
5801
[Memory Clear]
Before executing any of these SP codes, print an SMC Report.
001
All Clear
Initializes items SP5801-002 to -014 below.
Turn the main power switch off and on after executing this SP.
002
Engine - -
Clears the engine settings.
003
SCS - -
Clears the system settings.
004
IMH Memory Clr
Initializes the image file system.
(IMH: Image Memory Handler)
005
MCS -
Clears MCS data. DFU
006
Copier application
Clears the copier application settings.
IMPORTANT: Only use these SP Modes with Browser
Version 1.04.0 or newer, EXJS version 1.03.00 or
newer, and Specification 2.03 or newer.
⇒
Rev. 08/24
/
2012