Ricoh D131 - Page 547

SC800: Overall System
D131/D132/D133 2-80 SM Appendix
SC859 B
Data encryption conversion errors GW
Data encryption on the HDD failed.
01 HDD encrypted data restoration error
Data could not be restored after encryption.
 HDD connection loose, broken, defective
 Format HDD
 HDD defective
02 Power interrupt error
Power supply was interrupted during data encryption.
 Cycle the machine off/on
08 HDD Check Error
Data conversion was attempted with no HDD unit present.
 Confirm that HDD unit installed correctly
 Initialize HDD with SP5832-1
Note: After installation, a new HDD should be formatted with
SP5832-1
09 Power Loss During Data Conversion
Data conversion stopped before NVRAM/HDD data was converted.
 Format HDD with SP5832-1
10 Data Read Command Error
More than two illegal DMAC communications were returned.
 HDD defective
 Format HDD with SP5832-1
 Replace HDD