Service
Program
Mode Tables
1902 Fusing Web Motor Control
1 Fusing Web Used Area Display/Setting
Displays the percentage of the web consumption in 1% steps (0% to 100%).
This setting must be reset to zero after the web is replaced.
[0 to 120/0/1 %]
2 Fusing Web Motor Operation Interval
Adjusts the interval of copy operation time (seconds) after which the web
motor is driven.
D131: [5 to 50/18/1 s]
D132: [5 to 50/15/1 s]
D133: [5 to 50/14/1 s]
4 Web Near End Value
Adjusts the timing of the web near end alert by changing the amount of web
that has been used before the alert is triggered.
[0 to 100/80/1 %]
5 Web Roll Coefficient
Determines the coefficient of the web take-up time from cleaning toner from
the roller while taking into consideration the take-up time for web buckle. DFU
[10 to 20/9/1]
6 Web Length (0: 20m 1: 22.7m 2:28.5m 3:32m)
Set the length of web.
[0 to 3 / x /1]
D131/b/d: x = 3, D133: x = 2
7 Web Motor Counter: Continuous
[0 to 255/0/1 Step]
8 Web Motor Counter: Total
[0 to 255/0/1 Step]
To Next Page
Loading...
