Service
Program
Mode Tables
4 Attack Max Number
Sets a limit on the number of requests received for certification in order to slow
down the certification speed when an excessive number of access attempts
have been detected.
[50 to 200 / 200 / 1 attempt/step]
5420 User Authentication
These settings should be done with the System Administrator.
Note: These functions are enabled only after the user access feature has been
enabled.
1 Copy
Determines whether certification is required before a user can use the copy
applications.
[0 or 1/ 0 /1]
0: On, 1: Off
11 Document Server
Determines whether certification is required before a user can use the
document server.
[0 or 1/ 0 /1]
0: On, 1: Off
21 FAX
Switches fax authentication off and on.
[0 to 1/0/1] 0:Authenticate 1:Do not authenticate
31 Scanner
Determines whether certification is required before a user can use the scanner
applications.
[0 or 1/ 0 /1]
0: On, 1: Off
To Next Page
Loading...
