Main SP Tables-3
System Maintenance Section 2-363 D146/D147/D148/D149/D150
3133
[TE Detect :Set]
Displays the amount of sheets printed after toner near end is fixed.
011 Page Cnt:K *ENG
[0 to 5000 / 0 / 1sheet/step]
012 Page Cnt:C *ENG
013 Page Cnt:M *ENG
014 Page Cnt:Y *ENG
3133
[TE Detect :Set]
Sets dimension (cm2) in terms of blotted out A4 sized sheet to decide as toner
end after near toner end is fixed.
021 Set Pxl Cnt *ENG [0 to 1000000 / 7000 / 1cm2/step]
3133
[TE Detect :Set]
Displays the amount used with dimension (cm2) in terms of blotted out.
031 Pxl Cnt:K *ENG
[0 to 1000000 / 0 / 1cm2/step]
032 Pxl Cnt:C *ENG
033 Pxl Cnt:M *ENG
034 Pxl Cnt:Y *ENG
3150 [TE Sensor :Set]
001
SamplingCount *ENG [4 to 20 / 10 / 1counts/step]
Sets arrangement size of TE sensor.
002
Judge:p *ENG [0.2 to 1.0 / 0.8 / 0.1/step]
Sets threshold for to decide toner existing..
3150
[T TE Sensor :Set]
Percentage for "No remaining toner" of storing arrangement.
003 result:K *ENG
[0.0 to 0.1 / 0.5 / 0.1/step]
004 result:C *ENG
To Next Page
Loading...
