Ricoh D147 - Page 1581

Output Check Table
D146/D147/D148/D149/D150 3-42 System Maintenance Section
5804
[OUTPUT Check]
Outputs PWM for transfer HVP (paper transfer: +/-).
199 PP: PTR: + ENG
[0 or 1 / 0 / 1/step]
200 PP: PTR: - ENG
5804 [OUTPUT Check]
201
Duplex Guide Plate
Open/Close LED
ENG [0 or 1 / 0 / 1/step]
Lights duplex guide plate open/close LED.
5804 [OUTPUT Check]
202
Scanner Lamp ENG [0 or 1 / 0 / 1/step]
Checks output of scanner lamp.
Use to check light source malfunction when SC101-01, SC101-02, SC102-00,
SC142-00 occurs.
206
PTR Open/Close LED ENG [0 or 1 / 0 / 1/step]
Lights paper transfer open/close LED.
208
TM/P Sensor: F ENG [0 or 1 / 0 / 1/step]
Lights TM/P sensor: Front glowing part.
209
TM/P Sensor: C ENG [0 or 1 / 0 / 1/step]
Lights TM/P sensor: Center glowing part.
210
TM/P Sensor: R ENG [0 or 1 / 0 / 1/step]
Lights TM/P sensor: Rear glowing part.
211
HST Sensor Power ENG [0 or 1 / 0 / 1/step]
Powers the HST sensor.
5804
[OUTPUT Check]
Outputs PWM (Vcnt) to HST sensor: Y/M/C/K
212 HST Sensor: Y ENG
[0 or 1 / 0 / 1/step]
213 HST Sensor: M ENG