Ricoh D147 - Page 1588

Output Check Table
System Maintenance Section 3-49 D146/D147/D148/D149/D150
Input and Output
Check
020
Booklet Stapler Standard
Fence Motor
ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
021
Booklet Stapler Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
022
Dynamic Roller Transport
Motor
ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
023
Folder Transport Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
025
Press-fold Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
026
Tray Lift Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
027
Shift Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
028
Front Shift Jogger Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
* Not use: currently, VOLGA-B does not have setting jogger in system
configuration.
029
Rear Shift Jogger Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
* Not use: currently, VOLGA-B does not have setting jogger in system
configuration.
030
Shift Jogger Retraction Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
* Not use: currently, VOLGA-B does not have setting jogger in system
configuration.