Main SP Tables-2-1
System Maintenance Section 2-161 D146/D147/D148/D149/D150
020
Setting4:Y *ENG [0 to 90 / 40 / 5V/step]
Electric potential correction amount 4 against Electrify roller fatigue amount, Y
021
Setting5:K *ENG [0 to 90 / 10 / 1V/step]
Variation amount 5 K, for correcting electric potential phase when environment
changes.
022
Setting5:C *ENG [0 to 90 / 10 / 1V/step]
Variation amount 5 C, for correcting electric potential phase when environment
changes.
023
Setting5:M *ENG [0 to 90 / 10 / 1V/step]
Variation amount 5 M, for correcting electric potential phase when environment
changes.
024
Setting5:Y *ENG [0 to 90 / 10 / 1V/step]
Variation amount 5 Y, for correcting electric potential phase when environment
changes.
025
Setting6:K *ENG [-90 to 90 / 2 / 1V/step]
Electric potential correction amount 6 K, against Electrify roller total rotating
time.
026
Setting6:C *ENG [-90 to 90 / 2 / 1V/step]
Electric potential correction amount 6 C, against Electrify roller total rotating
time.
027
Setting6:M *ENG [-90 to 90 / 2 / 1V/step]
Electric potential correction amount 6,M, against Electrify roller total rotating
time.
028
Setting6:Y *ENG [-90 to 90 / 2 / 1V/step]
Electric potential correction amount 6 Y, against Electrify roller total rotating
time.
029
Display:Energized:K *ENG [0 to 90 / 0 / 1V/step]
Voltage correction value K, from Electrify roller fatigue.
To Next Page
Loading...
