Ricoh D147 - Page 882

Main SP Tables-2-1
System Maintenance Section 2-163 D146/D147/D148/D149/D150
SP Mode Tables
040
Split Number n: Y *ENG
[1 to 99 / D146: 15, D147: 15,
D148: 15, D149: 13, D150: 10 /
1/step]
Coefficient Y, for setting electric potential to multiple steps from total
electrification time.
041
Display:Energized for target
value:K
*ENG [0 to 90 / 0 / 1V/step]
Target value K, for voltage correction from Electrify roller fatigue.
042
Display:Energized for target
value:C
*ENG [0 to 90 / 0 / 1V/step]
Target value C, for voltage correction from Electrify roller fatigue.
043
Display:Energized for target
value:M
*ENG [0 to 90 / 0 / 1V/step]
Target value M, for voltage correction from Electrify roller fatigue.
044
Display:Energized for target
value:Y
*ENG [0 to 90 / 0 / 1V/step]
Target value Y, for voltage correction from Electrify roller fatigue.
2022 [Charge R Running Par]
001
Display:K *ENG [0 to 999999 / 0 / 1/step]
Value K, showing the electrification fatigue amount of Electrify roller.
002
Display:C *ENG [0 to 999999 / 0 / 1/step]
Value C, showing the electrification fatigue amount of Electrify roller.
003
Display:M *ENG [0 to 999999 / 0 / 1/step]
Value M, showing the electrification fatigue amount of Electrify roller.
004
Display:Y *ENG [0 to 999999 / 0 / 1/step]
Value Y, showing the electrification fatigue amount of Electrify roller.
005
PCU Rotation Time After
Correction: K
*ENG [0 to 9999999 / 0 / 1/step]