Ricoh D148 - Page 1544

Input Check Table
System Maintenance Section 3-5 D146/D147/D148/D149/D150
Input and Output
Check
023
By-pass: Main Scan Length
Sensor
ENG [0 to 31 / 0 / 1/step]
Value changes depending on main scan direction of paper set to bypass tray.
024
By-pass: Sub Scan Length
Sensor
ENG [0 or 1 / 0 / 1/step]
Value changes depending on sub scan direction of paper set to bypass tray.
025
Interlock Release Detection ENG
[0 to 1 / 0 / 1/step]
00: Unlocked
11: Locked
Detects open/close of interlock switch (front cover/right cover).
(00: Unlocked, 11: Locked)
026
Right Door Open/Close
Sensor
ENG
[0 or 1 / 0 / 1/step]
0: close
1: open
Detects right door status.
(0: close, 1: open)
027
Duplex Guide Plate
Open/Close Sensor
ENG
[0 or 1 / 0 / 1/step]
0: close
1: open
Detects duplex guide plate status.
(0: close, 1: open)
028
PTR Open/Close Sensor ENG
[0 or 1 / 0 / 1/step]
0: open
1: close
Detects paper transfer unit status.
(0: open, 1: close)
029
ITB Contact Sensor ENG
[0 or 1 / 0 / 1/step]
0: Abutting
1: Alienate
Detects image transfer roller (Y, M, C) and photoreceptors distance.
(0: Abutting, 1: Alienate)