Service Call Conditions
D158/D159/D160/D161/D170 5-86 SM
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC868-01 D
SD card access error
The SD controller returned an error during operation.
(Error occurred at the mount point of /mnt/sd1)
SD card defective
SD controller defective
SD card that starts an application
Turn the main power off and check the SD card insertion
status.
If no problem is found, insert the SD card and turn the
main power on.
If an error occurs, replace the SD card.
SD card for users
In case of a file system error, reformat the SD card
(using the "SD Formatter" made by Panasonic).*
In case of a device access error, turn the main power off
and check the SD card insertion status.
If no problem is found, insert the SD card and turn the
main power on.
If an error occurs, use another SD card.
If the error persists
* Do not format an SD card supplied with the main machine or sold as an option. You may only format SD
cards used for Firmware Update by a Customer Engineer.
Rev. 01/16/2014
To Next Page
Loading...
