Ricoh D158 - Page 879

Error Codes
SM 37 D702
FAX OPTION
TYPE M1
(D702)
Code Meaning Suggested Cause/Action
15-81 Repeated Destination
Registration Error
 Could not repeat receive the transmission
because the destination buffer is full and
the destination could not be created (this
error may occur when receiving a transfer
request or a request for notification of
reception).
15-91 Send Registration Error Could not receive the file for transfer to the
final destination:
 The format of the final destination or the
transfer destination is incorrect.
 Destinations are full so the final and
transfer destinations could not be created.
15-92 Memory Overflow  Transmission could not be received
because memory overflowed during the
transaction.
15-93 Memory Access Error  Transaction could not complete due to a
malfunction of SAF memory.
15-94 Incorrect ID Code  The machine rejected an incoming e-mail
for transfer request, because the ID code
in the incoming e-mail did not match the
ID code registered in the machine.
15-95 Transfer Station Function  The machine rejected an incoming e-mail
for transfer because the transfer function
was unavailable.
16-00 NCS: A network error to a
device with an option to
connect to a fax machine.
 Register the IP address
 Connect to a network.
22-00 Original length exceeded the
maximum scan length
 Divide the original into more than one
page.
 Check the resolution used for scanning.
Lower the scan resolution if possible.
 Add optional page memory.