87
4
Other Functions
Edit Function: Edit Image
Specify the area.
1 Touch the start point of the area you want to
specify.
2 Move your fi nger while touching it to move the area.
3 Release your fi nger from the screen to fi x the
specifi ed area.
* If you want to change the area, repeat the above
steps 1 to 3 .
4 Touch “OK”.
5 Touch “INSIDE” or “OUTSIDE”.
“INSIDE” is touched here.
If you touch “OUTSIDE”, the outside of the
specifi ed area is edited in the current mode.
When the specifi ed area is OK, touch “END”.
REFERENCE
Continue Page....
● When you want to cancel the specifi ed area, touch
“CLEAR”. The display changes as below.
●
If “ALL CL” is touched, all of the set area is cleared.
●
If “BOX”or “POLYGON” is touched, the specifi ed
area is cleared.
●
If “PEN 1”, “PEN 2”, “PEN 3”, or “PEN 4” is
touched, the area you want to cancel is cleared.
To Next Page
Loading...
