Chapter
6
6
Troubleshooting
Troubleshooting
This chapter describes what to do when an error has occurred and how to deal
with paper jams and error messages.
If Trouble Occurs
...............................................................................................
178
If Trouble Occurs
............................................................................................
178
When Messages Appear
...................................................................................
179
Supplying Paper While Printing
.........................................................................
182
If Paper Runs Out During Printing
.................................................................
182
Supplying Paper While Printing
.....................................................................
182
Changing Paper Size
.....................................................................................
183
Paper Jams
.......................................................................................................
185
Paper Jam on the Feeder Side (Feed Tray)
..................................................
185
Paper Jam on the Ejection Side (Print Tray Side)
..........................................
186
Paper Adhering to Drum
................................................................................
187
When “MASTER EJECTION ERROR” is Displayed
..........................................
189
Removing the Master Adhering to the Drum
..................................................
189
When Master Setting Error Has Occurred
.........................................................
192
How to Remove the Master
...........................................................................
192
When “SET MASTER ROLL PROPERLY” is Displayed
....................................
193
How to Set the Master Roll
............................................................................
193