Troubleshooting
40
3
Orientation-Fixed Paper
Orientation-fixed (top to bottom) might not print correctly, depending on how
the originals and paper are placed.
Reference
p.49 “Letterhead Setting”
Note
❒ Select [On] in [Letterhead Setting] under [Copier Features] (User Tools), and then
place the original and paper as shown below. When printing with the printer
function, placing orientation is the same.
❒ Set the paper type to [Letterhead] in [Tray Paper Settings] under [System Set-
tings](User Tools). This setting is only available when the printer/scanner and
fax units are installed. For details, see General Settings Guide.
❖
❖❖
❖ Original Orientation
❖
❖❖
❖ Loaded paper orientation
• For machine with copier function only
Exposure glass ADF
AAI054S
KirC2_AEcopyF1_FM.book Page 40 Wednesday, April 27, 2005 7:26 PM
To Next Page
Loading...
