Supplementary Specifications
139
6
Supplementary Specifications
❖
❖❖
❖ Batch mode
You cannot switch between 1-sided and 2-sided originals during copying.
❖
❖❖
❖ Mixed Size mode
• Copying or scanning speed might be slower in Mixed Size mode.
• When using with 1 Sided→2 Sided mode, always ensure that the originals
of each size are in even numbers. If you have an odd number of originals,
insert blank sheets to adjust the total.
❖
❖❖
❖ Bypass Tray Copy
• The following paper sizes can be selected as the standard sizes:
A3L, A4KL, A5KL, A6L, B4 JISL, B5 JISKL, B6 JISL, PostcardL,
11"×17"L, 8
1
/
2
"×14"L, 8
1
/
2
"×11"KL, 5
1
/
2
"×8
1
/
2
"L, 7
1
/
4
"×10
1
/
2
"KL,
8"×13"L, 8
1
/
2
"×13"L, 8
1
/
4
"×13"L, 11” × 14”L, 11” × 15”L, 10” × 14”L,
10” × 15”L, 8
1
/
4
” × 14”L, 8” × 10
1
/
2
”KL, 8 “× 10”KL, 12"×18"L
• The number of sheets you can set in the bypass tray depends on the paper
type. If the number set exceeds that in the table below, paper misfeeds may
occur or copies may be skewed.
❖
❖❖
❖ Preset Enlarge/Reduce
• You can select one of 12 preset ratios (5 enlargement ratios, 7 reduction ra-
tios).
• You can select a ratio regardless of the size of an original or copy paper.
With some ratios, parts of the image might not be copied or margins will
be displayed on copies.
• Copies can be reduced or enlarged as follows:
Paper type Number
Thick paper (105/157g/m
2
)
30 sheets
Thick paper (157/216g/m
2
)
20 sheets
Translucent paper 50 sheets
OHP transparencies 50 sheets
2
1
3
2
1
2
1
3
2
1
ADH027S
MartiniC2_EN_Copy-F1_FM.book Page 139 Tuesday, July 27, 2004 1:43 PM